Collecting native seeds | Redland City Council
Council service closures over Easter holidays

Customer service centres & libraries will be closed on Good Friday (29 March) through to Easter Monday (1 April). Waste Transfer Stations will be closed Good Friday. Bins will be collected as normal.

Further information

Collecting native seeds

Gardening to help Redlands wildlife and plants - collecting seeds from bush

Native plants display a wide variety of built-in seed dispersal mechanisms to ensure the seeds travel away from the parent plant and don’t just fall to the ground underneath.

Seed collectors therefore face a bit of a challenge – getting to the seeds before they disperse too far.

Different types of native seeds

Woody capsules

(e.g. eucalyptus, melaleuca, hakea)

The seeds of plants such as eucalyptus, melaleuca and hakea species are contained inside woody fruits which may remain on the plant for several years before they open.

Collect ripe capsules that are still tightly closed, and place in a paper bag or newspaper-lined tray in a warm spot – as the capsules dry out they will gradually open, releasing the seeds.

Cones

(e.g. casuarina, banksia)

Banksia and casuarina fruits are woody and have lots of individual compartments, some with seeds inside and some without. Parrots are masters of extracting seeds from cones – get to them before the parrots eat them all! Collect the whole fruiting body, making sure that the seed capsules are still tightly closed.

Casuarina seeds may be extracted using the ‘paper bag’ method described above, but Banksia cones may require more heat to split the capsules open. This can be achieved simply by baking the cones in a slow oven (100°C) for about 20 minutes. Watch them closely and you will see the capsules open before your eyes.

Seed pods

(e.g. acacia, daviesia, hovea)

Seed pods are often hard and difficult to break open while the seeds are ripening, but when they are dried out enough, they become brittle and eventually snap open with such force that the seeds are flung away from the parent plant.

Acacia seed pods look like flattened beans, and split open along the seams – on a hot, quiet day you might even hear them snapping open. Tie an old stocking or cloth bag around the ripe seed pods while they are still on the plant. This will catch the seeds as they are released.

Fleshy fruits

(e.g. figs, lilly-pilly)

Many rainforest plants produce fleshy fruits that are appetising to a range of birds and mammals. These animals are key aids in the dispersal of their seeds, which are unaffected by the process of digestion and will start germinating wherever they are deposited.  Some seeds even require the acidic environment of a digestive system to dissolve the outer seed coating and break their dormancy.

Collect whole ripe fruits from the tree and around the base. Under running water, clean away the pulp by rubbing the fruit through a sieve fine enough to trap the seeds. Only do this right before you plan to plant them though, and do not let the seeds dry out.

Wind dispersed seeds

(e.g. paper daisy, grasses)

Seeds from some plants develop feathery tops so that they can be whisked away from the parent plant by even the slightest breeze.

You can pick these straight from the plant when they look like they’re just about to blow away.

A few restrictions

A seed collection is much more ecologically valuable if it is made up of seeds from a number of different plants of the same species. There are, however, specific guidelines to follow when venturing beyond your own backyard to collect seeds.

You can collect seed from most species on your own land without a permit. Before collecting seed from anywhere else, including Council land, you will need to gain the permission of the landholder and you may require a permit. Learn more about seed collecting restrictions by visitng the Queensland Government website.

There are restrictions on collecting seed from threatened or protected species – in the Redlands these include grass trees (Xanthorrhoea species), Christmas Bells (Blandfordia grandiflora), Cabbage Palms (Livistona australis), Bottle and Flame trees (Brachychiton species), cycads and orchids.

Gardening to help Redlands wildlife and plants - Collecting seeds

Maintaining your seed collection

Cleaning seeds

Once you’ve extracted your seeds from their respective casings, they may be mixed in with all kinds of not-so-useful materials (such as infertile seeds and parts of the seed capsules) collectively known as ‘chaff’. Some of the chaff can be blown away as it is lighter than the seeds. Larger pieces may be removed using a fine tea-strainer that will let the seeds through but trap the waste material (or vice versa).

Storing seeds

Once you have collected your seeds, conditions may not be favourable for you to plant them straight away. With a bit of care, you will be able to keep them viable for many years.

Before storing seeds, they should be dry and free from any insects. You can spray them with fly spray or place a mothball in the container with them for a short time, but this isn’t recommended long term as it can affect the seeds’ viability. Then simply pop them in an airtight jar or snap-lock plastic bag in the fridge.

Breaking dormancy

Many seeds aren’t quite ready to germinate when they leave their parent plants. They lie dormant under the ground, sometimes for several years, until subjected to the specific triggers they need to begin germination.  Fortunately for the home gardener, many of these natural triggers can be simulated. It’s best to apply these treatments just before you plant the seeds.

Simulating bushfire

The Australian bush is spectacularly good at regenerating after fire, thanks to many plants that have seed designed specifically to survive the extremes of a bushfire.

Wattle (Acacia species) seeds have very hard seed coats which can be cracked open by heat. Pour near-boiling water over the seeds and let them cool – the combination of heat and water will help split their hard seed coats. Only plant the seeds that swell up in the water, as this indicates the seed coat has been cracked and it will therefore be more likely to germinate.

Others like Boronia need specific chemicals in bushfire smoke to trigger germination – the fiddly smoking process is made easier by commercially available ‘smoke water’ which has had smoke bubbled through it and can be used to soak seeds.

Scarifying

Scratching or scarifying the seed coats of certain hard seeds such as wattles and peas might increase your success rates. If the seeds are large enough, use a sharp knife or scalpel to scratch each seed. If they are smaller, rub them with sandpaper – the easiest way to do this is to line a plastic container and its lid with sandpaper, then put the seeds in and give it a good shake.

Leaching

Seeds such as Melicope species need to be soaked in water or leached with running water to remove chemical barriers to germination.  An easy way to do this is to put them in a stocking inside your toilet cistern! You can also place them in a jar of water and change the water at regular intervals.

No special treatment/dormancy

Seeds from plants like bottlebrushes, paper daisies and eucalypts don’t need to be treated at all – they can be planted straight into seed raising mix.

Stop wet seeds from clumping together

If your seeds are wet from cleaning or treatments and you want to plant them straight away, mix them with some vermiculite before sprinkling over the seed raising mix.

Vermiculite is a lightweight mineral which will stop the wet seeds from clumping together, ensuring the seedlings will be more evenly dispersed.

It will also increase the water holding capacity of the soil.